Review





Similar Products

patch clamp micromanipulator  (Scientifica)
86
Scientifica patch clamp micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/5+clamp+clampex10+custom+patch+rig+running+scientifica/pmc12602122-159-0-3
Average 86 stars, based on 1 article reviews
patch clamp micromanipulator - by Bioz Stars, 2026-10
86/100 stars
  Buy from Supplier
patch clamp micromanipulator patchstar  (Scientifica)
90
Scientifica patch clamp micromanipulator patchstar
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator Patchstar, supplied by Scientifica, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/motorized+patchstar+micromanipulator/10__21769_slash_bioprotoc__5035-123-0-4
Average 90 stars, based on 1 article reviews
patch clamp micromanipulator patchstar - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
micromanipulator patch clamp amplifier  (Eppendorf AG)
93
Eppendorf AG micromanipulator patch clamp amplifier
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Micromanipulator Patch Clamp Amplifier, supplied by Eppendorf AG, used in various techniques. Bioz Stars score: 93/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/Clamp/pmc12121364-55-23-51
Average 93 stars, based on 1 article reviews
micromanipulator patch clamp amplifier - by Bioz Stars, 2026-10
93/100 stars
  Buy from Supplier
dual micromanipulator system for patch clamp  (Sensapex Oy)
90
Sensapex Oy dual micromanipulator system for patch clamp
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Dual Micromanipulator System For Patch Clamp, supplied by Sensapex Oy, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/dual+micromanipulator+system+for+patch+clamp/pmc09729228-294-24-26
Average 90 stars, based on 1 article reviews
dual micromanipulator system for patch clamp - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
patch clamp scientifica microstar micromanipulators  (Scientifica)
86
Scientifica patch clamp scientifica microstar micromanipulators
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Scientifica Microstar Micromanipulators, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/micromanipulator/pmc09374761-453-0-1
Average 86 stars, based on 1 article reviews
patch clamp scientifica microstar micromanipulators - by Bioz Stars, 2026-10
86/100 stars
  Buy from Supplier
patch-clamp micromanipulator pcs-5000  (Burleigh Instruments)
90
Burleigh Instruments patch-clamp micromanipulator pcs-5000
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator Pcs 5000, supplied by Burleigh Instruments, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/piezoelectric+manipulator+pcs+5000/pmc08931764__ja2c00581_si_001-19-12-15
Average 90 stars, based on 1 article reviews
patch-clamp micromanipulator pcs-5000 - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
patch clamp micromanipulator  (Thorlabs)
86
Thorlabs patch clamp micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/clamp+micromanipulator+patch/10__2139_slash_ssrn__4239119-153-7-12
Average 86 stars, based on 1 article reviews
patch clamp micromanipulator - by Bioz Stars, 2026-10
86/100 stars
  Buy from Supplier
micromanipulator  (Molecular Devices LLC)
99
Molecular Devices LLC micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Micromanipulator, supplied by Molecular Devices LLC, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patch+clamp+micromanipulator/MultiClamp+Amplifier/pm33582153-71-7-17
Average 99 stars, based on 1 article reviews
micromanipulator - by Bioz Stars, 2026-10
99/100 stars
  Buy from Supplier

Image Search Results


Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].

Journal: Bio-protocol

Article Title: Optogenetic Approach for Investigating Descending Control of Nociception in Ex Vivo Spinal Cord Preparation

doi: 10.21769/BioProtoc.5483

Figure Lengend Snippet: Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].

Article Snippet: Patch clamp micromanipulator (Scientifica, model: PatchStar) 5.

Techniques: Ex Vivo, Modification